Sacramento / California Fire Sprinkler Tests & Inspections
Fire Sprinkler Service and Maintenance
Fire sprinklers are tested to ensure installed fire sprinklers in Sacramento / California are in a constant state of readiness and are fully operational to fight fires. Always refer to current safety, building and fire codes in Sacramento / California to ensure compliance.
Practicing fire safety will help save lives and property from the devastating effects of fire. Fire prevention methods like installing fire sprinkler systems are used to help fight, suppress, extinguish or contain the rapid spread of fire.
All installed fire sprinkler systems should be tested and inspected per their described schedule according to Federal, State, OSHA, Insurance Companies, NFPA Standard and Codes and any additional requirements or fire codes the City of Sacramento / California may enforce. Tests and inspections should be completed by actively licensed fire sprinkler companies in Sacramento / California and their technicians and personnel. Certificates may be issued by a fire sprinkler company verifying the installed fire sprinkler system is operational and in a state of readiness upon successful completion of monthly, quarterly (4mo), semi-annual (6mo), annual (1yr), three (3yr), five year (5yr) tests and inspections.
Monthly Fire Sprinkler Tests & Inspections
Monthly tests and inspections may be completed on installed fire sprinkler systems by doing a walk through. A check of all fire sprinkler pipes, risers, standpipes, FDC outlets, fire hose connections, sprinkler heads, valves and pressure gauges should be checked to ensure in they are in open positions, no damage from impact, no leaks or water accumulating, see they are sealed, no signs of rust, ruptures, frozen lines, obstructions, breaks or corrosion, look at gauges to make sure there proper water/air pressure, ensure system is accessible and has all proper signs labeling and name plates of installed fire protection equipment for emergency personnel or the City of Sacramento fire department to easily locate.
Quarterly Tests | 4 Month Fire Sprinkler Tests & Inspections
Quarterly tests and inspections may be completed on installed fire sprinkler systems by completing a series of tests on installed fire sprinkler systems. Fire service mains may be tested for static pressure and psi levels, water flow alarms, sensors and detectors to ensure they will sound, fire pumps and pressure gauges may be checked to ensure operational, hydraulic name plates securely attached to risers and easy to read, backflow preventers may be checked to ensure no back flow of water, wet, dry, pre action and deluge valves and sprinkler heads visually inspected to ensure no signs of rust, corrosion, leaks or damage,
Semi-Annual Tests | 6 Month Fire Sprinkler Tests & Inspections
Semi annual (6mo) tests and inspections may be completed on installed fire sprinkler systems by checking installed fire pumps, supervisory switch functions, electrical systems, cooling systems, chemical antifreeze levels and operation of alarms, devices, control boxes, pull stations, control panels and test or bypass of water flow alarms.
Annual Tests | 1 Year Fire Sprinkler Tests & Inspections
Annual (1yr) tests and inspections may be completed on installed fire sprinkler systems by checking building standpipes, hangers, braces, fire hose connections, FDC outlets, pipes, risers, fittings, valves, main drain tests, antifreeze tests, control valves operation, check quick opening devices, flow trip tests, pre action valves, dry pipe valves, backflow preventer assemblies priming, pressure and alarms, and low point drains on fire protection systems in Sacramento / California.
Three Year Tests | 3 Year Fire Sprinkler Tests & Inspections
Three year (3 yr) tests and inspections may be completed on installed fire sprinkler systems by checking valves, completing full flow tests on dry pipe, pre action or quick opening sprinkler systems, NFPA standards and codes may change every three years with the issuance of new NFPA codes, standpipe system hoses should be checked every 3 years, hose valves to check if open/close, a pump discharge bypass full flow test and check interiors of water tanks, possibly clean them if debris, silt or sediment found.
Five Year Tests | 5 Year Fire Sprinkler Tests & Inspections
It is recommended that you work with knowledgeable and experienced fire sprinkler companies in Sacramento / California for completion of any five year (5yr) fire sprinkler tests and inspections.
After five years an installed fire sprinkler system may start getting old, the fire sprinkler company or its technicians may notice that wear and tear or even discover parts, components or devices that should be replaced and/or repairs may be necessary for the fire sprinkler system to be certified of its operation by the fire sprinkler company performing the tests and inspections.
Tests and inspections should be completed by actively licensed fire sprinkler companies in Sacramento / California and their technicians and personnel. Certificates may be issued by a fire sprinkler company verifying the installed fire sprinkler system is operational and in a state of readiness upon successful completion of monthly, quarterly (4mo), semi-annual (6mo), annual (1yr), three (3yr), five year (5yr) tests and inspections.
California Title 19 Tests and Inspections | California Fire Code
The State fire marshal’s office of California released a comprehensive analysis of all tests and inspections that should be performed and completed at five years (5yrs) on any installed fire sprinkler system. In California this is referred to as Title 19 and is known as one of the most thorough tests and inspections that can be performed to ensure a state of system readiness and that all installed fire sprinkler systems are fully operational and in good repair.